Use of the SHAKE One-Way Hash Functions in the Cryptographic Message Syntax (CMS)Cisco Systemspkampana@cisco.comNIST100 Bureau DriveGaithersburgMD20899United States of Americaquynh.Dang@nist.gov
General
LAMPS WGSHAKEs in CMSSHAKECMS with SHAKEsThis document updates the "Cryptographic Message Syntax (CMS)
Algorithms"
(RFC 3370) and describes the conventions for using the SHAKE family of
hash functions in the Cryptographic Message Syntax as one-way hash
functions with the RSA Probabilistic Signature Scheme (RSASSA-PSS)
and Elliptic Curve Digital Signature Algorithm (ECDSA). The
conventions for the associated signer public keys in CMS are also
described.Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by
the Internet Engineering Steering Group (IESG). Further
information on Internet Standards is available in Section 2 of
RFC 7841.
Information about the current status of this document, any
errata, and how to provide feedback on it may be obtained at
.
Copyright Notice
Copyright (c) 2020 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
() in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with
respect to this document. Code Components extracted from this
document must include Simplified BSD License text as described in
Section 4.e of the Trust Legal Provisions and are provided without
warranty as described in the Simplified BSD License.
Table of Contents
. Introduction
. Terminology
. Identifiers
. Use in CMS
. Message Digests
. Signatures
. RSASSA-PSS Signatures
. ECDSA Signatures
. Public Keys
. Message Authentication Codes
. IANA Considerations
. Security Considerations
. References
. Normative References
. Informative References
. ASN.1 Module
Acknowledgements
Authors' Addresses
Introduction"Cryptographic Message Syntax (CMS)" describes syntax used to
digitally sign, digest, authenticate, or encrypt arbitrary message contents.
"Cryptographic Message Syntax (CMS) Algorithms"
defines the use of common cryptographic algorithms with CMS. This
specification updates RFC 3370 and describes the use of the SHAKE128 and SHAKE256
specified in as new hash functions in CMS. In addition,
it describes the use of these functions with the RSA Probabilistic
Signature Scheme (RSASSA-PSS) signature
algorithm and the Elliptic Curve Digital Signature
Algorithm (ECDSA) with the CMS signed-data content type.In the SHA-3 family, two extendable-output functions (SHAKEs), SHAKE128 and SHAKE256,
are defined. Four other hash function instances (SHA3-224, SHA3-256,
SHA3-384, and SHA3-512) are also defined but are out of scope for this document.
A SHAKE is a variable-length hash function defined as SHAKE(M, d) where the
output is a d-bit-long digest of message M. The corresponding collision and second-preimage-resistance strengths for SHAKE128 are min(d/2,128) and min(d,128) bits,
respectively (see Appendix A.1 of ). And the
corresponding collision and second-preimage-resistance
strengths for SHAKE256 are min(d/2,256) and min(d,256) bits, respectively.
In this specification, we use d=256 (for SHAKE128) and d=512 (for SHAKE256).A SHAKE can be used in CMS as the message digest function (to hash the
message to be signed) in RSASSA-PSS and ECDSA, as the message
authentication code, and as the mask generation function (MGF) in RSASSA-PSS.
This specification describes the identifiers for SHAKEs to be used in
CMS and their meanings. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED",
"MAY", and "OPTIONAL" in this document are to be interpreted as
described in BCP 14
when, and only when, they appear in all capitals, as shown here.
IdentifiersThis section identifies eight new object identifiers (OIDs)
for using SHAKE128 and SHAKE256 in CMS.Two object identifiers for SHAKE128 and SHAKE256 hash functions are defined
in , and we include them here for convenience.
id-shake128 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1) gov(101) csor(3)
nistAlgorithm(4) 2 11 }
id-shake256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1) gov(101) csor(3)
nistAlgorithm(4) 2 12 }
In this specification, when using the id-shake128 or id-shake256 algorithm identifiers, the parameters MUST be absent. That is, the identifier SHALL be a SEQUENCE of one component, the OID.
defines two identifiers for RSASSA-PSS signatures using SHAKEs, which we include here for
convenience.
id-RSASSA-PSS-SHAKE128 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 30 }
id-RSASSA-PSS-SHAKE256 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 31 }
The same RSASSA-PSS algorithm identifiers can be used for identifying
public keys and signatures.
also defines two algorithm
identifiers of ECDSA signatures using SHAKEs, which we include here for
convenience.
id-ecdsa-with-shake128 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 32 }
id-ecdsa-with-shake256 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 33 }
The parameters for the four RSASSA-PSS and ECDSA identifiers
MUST be absent. That is, each identifier SHALL be a SEQUENCE of one component,
the OID.
In , the National
Institute of Standards and Technology (NIST) defines two object
identifiers for Keccak message authentication codes (KMACs) using SHAKE128 and SHAKE256,
and we include them here for convenience.
id-KmacWithSHAKE128 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1) gov(101) csor(3)
nistAlgorithm(4) 2 19 }
id-KmacWithSHAKE256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1) gov(101) csor(3)
nistAlgorithm(4) 2 20 }
The parameters for id-KmacWithSHAKE128 and id-KmacWithSHAKE256 are OPTIONAL.Sections , , , and specify
the required output length for each use of SHAKE128 or SHAKE256 in
message digests, RSASSA-PSS, ECDSA, and KMAC.Use in CMSMessage DigestsThe id-shake128 and id-shake256 OIDs (see ) can
be used as the digest algorithm identifiers located in the SignedData,
SignerInfo, DigestedData, and the AuthenticatedData digestAlgorithm fields
in CMS . The OID encoding MUST omit the parameters field and the output length of SHAKE128 or SHAKE256 as the message digest MUST be 32 or 64 bytes, respectively.The digest values are located in the DigestedData field and the Message
Digest authenticated attribute included in the signedAttributes of the
SignedData signerInfos. In addition, digest values are input to
signature algorithms. The digest algorithm MUST be the same as the
message hash algorithms used in signatures.SignaturesIn CMS, signature algorithm identifiers are located in the SignerInfo
signatureAlgorithm field of signed-data content type and countersignature attribute.
Signature values are located in the SignerInfo signature field of
signed-data content type and countersignature attribute.Conforming implementations that process RSASSA-PSS and
ECDSA with SHAKE signatures when processing CMS data MUST recognize the
corresponding OIDs specified in .When using RSASSA-PSS or ECDSA with SHAKEs, the RSA modulus or ECDSA
curve order SHOULD be chosen in line with the SHAKE output length. Refer to for more details.RSASSA-PSS SignaturesThe RSASSA-PSS algorithm is defined in .
When id-RSASSA-PSS-SHAKE128 or id-RSASSA-PSS-SHAKE256 (specified in )
is used, the encoding MUST omit the parameters field. That is,
the AlgorithmIdentifier SHALL be a SEQUENCE of one component:
id-RSASSA-PSS-SHAKE128 or id-RSASSA-PSS-SHAKE256.
defines RSASSA-PSS-params that are used to define the algorithms and inputs
to the algorithm.
This specification does not use parameters because the
hash, mask generation algorithm, trailer, and salt are embedded in
the OID definition.The hash algorithm used to hash a message being signed and the hash
algorithm as the mask generation function used in RSASSA-PSS MUST be
the same: both SHAKE128 or both SHAKE256. The output length of
the hash algorithm that hashes the message SHALL be 32 (for SHAKE128)
or 64 bytes (for SHAKE256). The mask generation function takes an octet string of variable
length and a desired output length as input, and outputs an octet
string of the desired length. In RSASSA-PSS with SHAKEs, the SHAKEs
MUST be used natively as the MGF, instead of the MGF1
algorithm that uses the hash function in multiple iterations, as
specified in . In other words, the MGF is defined as the
SHAKE128 or SHAKE256 with input being the mgfSeed for
id-RSASSA-PSS-SHAKE128 and id-RSASSA-PSS-SHAKE256,
respectively.
The mgfSeed is an octet string used as the seed to generate
the mask . As explained in Step 9 of
, the
output length of the MGF is emLen - hLen - 1 bytes. emLen is the
maximum message length ceil((n-1)/8), where n is the RSA modulus in
bits. hLen is 32 and 64 bytes for id-RSASSA-PSS-SHAKE128 and
id-RSASSA-PSS-SHAKE256, respectively. Thus, when SHAKE is used as
the MGF, the SHAKE output length maskLen is (8*emLen - 264) or
(8*emLen - 520) bits, respectively. For example, when RSA modulus n
is 2048, the output length of SHAKE128 or SHAKE256 as the MGF will
be 1784 or 1528 bits when id-RSASSA-PSS-SHAKE128 or
id-RSASSA-PSS-SHAKE256 is used, respectively.The RSASSA-PSS saltLength MUST be 32 bytes for id-RSASSA-PSS-SHAKE128
or 64 bytes for id-RSASSA-PSS-SHAKE256.
Finally, the trailerField MUST be 1, which represents the trailer
field with hexadecimal value 0xBC .ECDSA SignaturesThe Elliptic Curve Digital Signature Algorithm (ECDSA) is defined in
. When the id-ecdsa-with-shake128 or id-ecdsa-with-shake256
(specified in ) algorithm identifier appears, the
respective SHAKE function is used as the hash.
The encoding MUST omit the parameters field. That is, the AlgorithmIdentifier
SHALL be a SEQUENCE of one component, the OID id-ecdsa-with-shake128 or
id-ecdsa-with-shake256.For simplicity and compliance with the ECDSA standard
specification ,
the output length of the hash function must be explicitly determined.
The output length for SHAKE128 or SHAKE256 used in ECDSA MUST be 32
or 64 bytes, respectively. Conforming Certification Authority (CA) implementations that generate ECDSA with SHAKE signatures
in certificates or Certificate Revocation Lists (CRLs) SHOULD generate such signatures with a
deterministically generated, nonrandom k in accordance with all
the requirements specified in .
They MAY also generate such signatures
in accordance with all other recommendations in or
if they have a stated policy that requires
conformance to those standards. Those standards have not specified
SHAKE128 and SHAKE256 as hash algorithm options. However, SHAKE128 and
SHAKE256 with output length being 32 and 64 octets, respectively, can
be used instead of 256 and 512-bit output hash algorithms, such as SHA256
and SHA512.Public KeysIn CMS, the signer's public key algorithm identifiers are located in the
OriginatorPublicKey's algorithm attribute.
The conventions and encoding for RSASSA-PSS and ECDSA
public keys algorithm identifiers are as specified in
,
,
and .
Traditionally, the rsaEncryption object identifier is used to
identify RSA public keys. The rsaEncryption object identifier
continues to identify the public key when the RSA private
key owner does not wish to limit the use of the public key
exclusively to RSASSA-PSS with SHAKEs. When the RSA private key
owner wishes to limit the use of the public key exclusively
to RSASSA-PSS, the AlgorithmIdentifier for RSASSA-PSS defined
in SHOULD be used as the algorithm attribute
in the OriginatorPublicKey sequence. Conforming client
implementations that process RSASSA-PSS with SHAKE public keys
in CMS message MUST recognize the corresponding OIDs in .Conforming implementations MUST specify and process the
algorithms explicitly by using the OIDs specified in
when encoding ECDSA with SHAKE
public keys in CMS messages. The identifier parameters, as explained in ,
MUST be absent. Message Authentication CodesKeccak message authentication code (KMAC) is specified in .
In CMS, KMAC algorithm identifiers are located in the AuthenticatedData
macAlgorithm field. The KMAC values are located in the AuthenticatedData mac field.When the id-KmacWithSHAKE128 or id-KmacWithSHAKE256 OID
is used as the MAC algorithm identifier, the parameters field is optional
(absent or present). If absent, the SHAKE256 output length used in KMAC is
32 or 64 bytes, respectively, and the customization string is an empty string by default.Conforming implementations that process KMACs with the SHAKEs
when processing CMS data MUST recognize these identifiers.When calculating the KMAC output, the variable N is 0xD2B282C2, S
is an empty string, and L (the integer representing the requested output
length in bits) is 256 or 512 for KmacWithSHAKE128 or KmacWithSHAKE256,
respectively, in this specification.IANA ConsiderationsOne object identifier for the ASN.1 module in
was updated in the "Structure of Management Information (SMI) Security for S/MIME Module Identifier
(1.2.840.113549.1.9.16.0)" registry:
Decimal
Description
References
70
CMSAlgsForSHAKE-2019
RFC 8702
Security ConsiderationsThis document updates . The security considerations
section of that document applies to this specification as well.NIST has defined appropriate use of the hash functions in terms of the algorithm
strengths and expected time frames for secure use in Special Publications (SPs)
and .
These documents can be used as guides to choose appropriate key sizes
for various security scenarios. SHAKE128 with an output length of 32 bytes offers 128 bits of collision
and preimage resistance. Thus, SHAKE128 OIDs in this specification are
RECOMMENDED with a 2048- (112-bit security) or 3072-bit
(128-bit security) RSA modulus or curves with a group order of 256 bits
(128-bit security). SHAKE256 with a 64-byte output length offers 256 bits
of collision and preimage resistance. Thus, the SHAKE256 OIDs in this
specification are RECOMMENDED with 4096-bit RSA modulus
or higher or curves with group order of at least 512 bits, such as NIST
curve P-521 (256-bit security). Note that we recommended a 4096-bit RSA
because we would need a 15360-bit modulus for 256 bits of security, which is impractical for today's technology.When more than two parties share the same message-authentication key,
data origin authentication is not provided. Any party that knows the
message-authentication key can compute a valid MAC; therefore, the
content could originate from any one of the parties.ReferencesNormative ReferencesKey words for use in RFCs to Indicate Requirement LevelsIn many standards track documents several words are used to signify the requirements in the specification. These words are often capitalized. This document defines these words as they should be interpreted in IETF documents. This document specifies an Internet Best Current Practices for the Internet Community, and requests discussion and suggestions for improvements.Cryptographic Message Syntax (CMS) AlgorithmsAdditional Algorithms and Identifiers for RSA Cryptography for use in the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) ProfileThis document supplements RFC 3279. It describes the conventions for using the RSA Probabilistic Signature Scheme (RSASSA-PSS) signature algorithm, the RSA Encryption Scheme - Optimal Asymmetric Encryption Padding (RSAES-OAEP) key transport algorithm and additional one-way hash functions with the Public-Key Cryptography Standards (PKCS) #1 version 1.5 signature algorithm in the Internet X.509 Public Key Infrastructure (PKI). Encoding formats, algorithm identifiers, and parameter formats are specified. [STANDARDS-TRACK]Elliptic Curve Cryptography Subject Public Key InformationThis document specifies the syntax and semantics for the Subject Public Key Information field in certificates that support Elliptic Curve Cryptography. This document updates Sections 2.3.5 and 5, and the ASN.1 module of "Algorithms and Identifiers for the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile", RFC 3279. [STANDARDS-TRACK]Cryptographic Message Syntax (CMS)This document describes the Cryptographic Message Syntax (CMS). This syntax is used to digitally sign, digest, authenticate, or encrypt arbitrary message content. [STANDARDS-TRACK]PKCS #1: RSA Cryptography Specifications Version 2.2This document provides recommendations for the implementation of public-key cryptography based on the RSA algorithm, covering cryptographic primitives, encryption schemes, signature schemes with appendix, and ASN.1 syntax for representing keys and for identifying the schemes.This document represents a republication of PKCS #1 v2.2 from RSA Laboratories' Public-Key Cryptography Standards (PKCS) series. By publishing this RFC, change control is transferred to the IETF.This document also obsoletes RFC 3447.Ambiguity of Uppercase vs Lowercase in RFC 2119 Key WordsRFC 2119 specifies common key words that may be used in protocol specifications. This document aims to reduce the ambiguity by clarifying that only UPPERCASE usage of the key words have the defined special meanings.SHA-3 Standard: Permutation-Based Hash and Extendable-Output FunctionsNational Institute of Standards and Technology (NIST)SHA-3 Derived Functions: cSHAKE, KMAC, TupleHash and ParallelHashNational Institute of Standards and Technology (NIST)Informative ReferencesUse of the SHA3 One-way Hash Functions in the Cryptographic Message Syntax (CMS)This document describes the conventions for using the four one-way hash functions in the SHA3 family with the Cryptographic Message Syntax (CMS).Work in ProgressAlgorithms and Identifiers for the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) ProfileThis document specifies algorithm identifiers and ASN.1 encoding formats for digital signatures and subject public keys used in the Internet X.509 Public Key Infrastructure (PKI). Digital signatures are used to sign certificates and certificate revocation list (CRLs). Certificates include the public key of the named subject. [STANDARDS-TRACK]Use of Elliptic Curve Cryptography (ECC) Algorithms in Cryptographic Message Syntax (CMS)This document describes how to use Elliptic Curve Cryptography (ECC) public key algorithms in the Cryptographic Message Syntax (CMS). The ECC algorithms support the creation of digital signatures and the exchange of keys to encrypt or authenticate content. The definition of the algorithm processing is based on the NIST FIPS 186-3 for digital signature, NIST SP800-56A and SEC1 for key agreement, RFC 3370 and RFC 3565 for key wrap and content encryption, NIST FIPS 180-3 for message digest, SEC1 for key derivation, and RFC 2104 and RFC 4231 for message authentication code standards. This document obsoletes RFC 3278. This document is not an Internet Standards Track specification; it is published for informational purposes.New ASN.1 Modules for Cryptographic Message Syntax (CMS) and S/MIMEThe Cryptographic Message Syntax (CMS) format, and many associated formats, are expressed using ASN.1. The current ASN.1 modules conform to the 1988 version of ASN.1. This document updates those ASN.1 modules to conform to the 2002 version of ASN.1. There are no bits-on-the-wire changes to any of the formats; this is simply a change to the syntax. This document is not an Internet Standards Track specification; it is published for informational purposes.Additional New ASN.1 Modules for the Cryptographic Message Syntax (CMS) and the Public Key Infrastructure Using X.509 (PKIX)The Cryptographic Message Syntax (CMS) format, and many associated formats, are expressed using ASN.1. The current ASN.1 modules conform to the 1988 version of ASN.1. This document updates some auxiliary ASN.1 modules to conform to the 2008 version of ASN.1; the 1988 ASN.1 modules remain the normative version. There are no bits- on-the-wire changes to any of the formats; this is simply a change to the syntax. This document is not an Internet Standards Track specification; it is published for informational purposes.Deterministic Usage of the Digital Signature Algorithm (DSA) and Elliptic Curve Digital Signature Algorithm (ECDSA)This document defines a deterministic digital signature generation procedure. Such signatures are compatible with standard Digital Signature Algorithm (DSA) and Elliptic Curve Digital Signature Algorithm (ECDSA) digital signatures and can be processed with unmodified verifiers, which need not be aware of the procedure described therein. Deterministic signatures retain the cryptographic security features associated with digital signatures but can be more easily implemented in various environments, since they do not need access to a source of high-quality randomness.Internet X.509 Public Key Infrastructure: Additional Algorithm Identifiers for RSASSA-PSS and ECDSA Using SHAKEsDigital signatures are used to sign messages, X.509 certificates, and Certificate Revocation Lists (CRLs). This document updates the "Algorithms and Identifiers for the Internet X.509 Public Key Infrastructure Certificate and Certificate Revocation List (CRL) Profile" (RFC 3279) and describes the conventions for using the SHAKE function family in Internet X.509 certificates and revocation lists as one-way hash functions with the RSA Probabilistic signature and Elliptic Curve Digital Signature Algorithm (ECDSA) signature algorithms. The conventions for the associated subject public keys are also described.SEC 1: Elliptic Curve CryptographyStandards for Efficient Cryptography GroupComputer Security Objects RegisterNational Institute of Standards and Technology (NIST)Recommendation for Applications Using Approved Hash AlgorithmsNational Institute of Standards and Technology (NIST)Cryptographic Algorithms and Key Sizes for Personal Identity VerificationNational Institute of Standards and Technology (NIST)Public Key Cryptography for the Financial Services Industry: the Elliptic Curve Digital Signature Algorithm (ECDSA)American National Standard for Financial Services (ANSI)ASN.1 ModuleThis appendix includes the ASN.1 modules for SHAKEs in CMS.
This module includes some ASN.1 from other standards for reference.
CMSAlgsForSHAKE-2019 { iso(1) member-body(2) us(840)
rsadsi(113549) pkcs(1) pkcs-9(9) smime(16) modules(0)
id-mod-cms-shakes-2019(70) }
DEFINITIONS EXPLICIT TAGS ::=
BEGIN
-- EXPORTS ALL;
IMPORTS
DIGEST-ALGORITHM, MAC-ALGORITHM, SMIME-CAPS
FROM AlgorithmInformation-2009
{ iso(1) identified-organization(3) dod(6) internet(1) security(5)
mechanisms(5) pkix(7) id-mod(0)
id-mod-algorithmInformation-02(58) }
RSAPublicKey, rsaEncryption, id-ecPublicKey
FROM PKIXAlgs-2009 { iso(1) identified-organization(3) dod(6)
internet(1) security(5) mechanisms(5) pkix(7) id-mod(0)
id-mod-pkix1-algorithms2008-02(56) }
sa-rsassapssWithSHAKE128, sa-rsassapssWithSHAKE256,
sa-ecdsaWithSHAKE128, sa-ecdsaWithSHAKE256
FROM PKIXAlgsForSHAKE-2019 {
iso(1) identified-organization(3) dod(6)
internet(1) security(5) mechanisms(5) pkix(7) id-mod(0)
id-mod-pkix1-shakes-2019(94) } ;
-- Message digest Algorithms (mda-)
-- used in SignedData, SignerInfo, DigestedData,
-- and the AuthenticatedData digestAlgorithm
-- fields in CMS
--
-- This expands MessageAuthAlgs from [RFC5652] and
-- MessageDigestAlgs in [RFC5753]
--
-- MessageDigestAlgs DIGEST-ALGORITHM ::= {
-- mda-shake128 |
-- mda-shake256,
-- ...
-- }
--
-- One-Way Hash Functions
-- SHAKE128
mda-shake128 DIGEST-ALGORITHM ::= {
IDENTIFIER id-shake128 -- with output length 32 bytes.
}
id-shake128 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16)
us(840) organization(1) gov(101)
csor(3) nistAlgorithm(4)
hashAlgs(2) 11 }
-- SHAKE256
mda-shake256 DIGEST-ALGORITHM ::= {
IDENTIFIER id-shake256 -- with output length 64 bytes.
}
id-shake256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2) country(16)
us(840) organization(1) gov(101)
csor(3) nistAlgorithm(4)
hashAlgs(2) 12 }
--
-- Public key algorithm identifiers located in the
-- OriginatorPublicKey's algorithm attribute in CMS.
-- And Signature identifiers used in SignerInfo
-- signatureAlgorithm field of signed-data content
-- type and countersignature attribute in CMS.
--
-- From RFC 5280, for reference:
-- rsaEncryption OBJECT IDENTIFIER ::= { pkcs-1 1 }
-- When the rsaEncryption algorithm identifier is used
-- for a public key, the AlgorithmIdentifier parameters
-- field MUST contain NULL.
--
id-RSASSA-PSS-SHAKE128 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 30 }
id-RSASSA-PSS-SHAKE256 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 31 }
-- When the id-RSASSA-PSS-* algorithm identifiers are used
-- for a public key or signature in CMS, the AlgorithmIdentifier
-- parameters field MUST be absent. The message digest algorithm
-- used in RSASSA-PSS MUST be SHAKE128 or SHAKE256 with a 32- or
-- 64-byte output length, respectively. The mask generation
-- function MUST be SHAKE128 or SHAKE256 with an output length
-- of (8*ceil((n-1)/8) - 264) or (8*ceil((n-1)/8) - 520) bits,
-- respectively, where n is the RSA modulus in bits.
-- The RSASSA-PSS saltLength MUST be 32 or 64 bytes, respectively.
-- The trailerField MUST be 1, which represents the trailer
-- field with hexadecimal value 0xBC. Regardless of
-- id-RSASSA-PSS-* or rsaEncryption being used as the
-- AlgorithmIdentifier of the OriginatorPublicKey, the RSA
-- public key MUST be encoded using the RSAPublicKey type.
-- From RFC 4055, for reference:
-- RSAPublicKey ::= SEQUENCE {
-- modulus INTEGER, -- -- n
-- publicExponent INTEGER } -- -- e
id-ecdsa-with-shake128 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 32 }
id-ecdsa-with-shake256 OBJECT IDENTIFIER ::= { iso(1)
identified-organization(3) dod(6) internet(1)
security(5) mechanisms(5) pkix(7) algorithms(6) 33 }
-- When the id-ecdsa-with-shake* algorithm identifiers are
-- used in CMS, the AlgorithmIdentifier parameters field
-- MUST be absent and the signature algorithm should be
-- deterministic ECDSA [RFC6979]. The message digest MUST
-- be SHAKE128 or SHAKE256 with a 32- or 64-byte output
-- length, respectively. In both cases, the ECDSA public key,
-- MUST be encoded using the id-ecPublicKey type.
-- From RFC 5480, for reference:
-- id-ecPublicKey OBJECT IDENTIFIER ::= {
-- iso(1) member-body(2) us(840) ansi-X9-62(10045) keyType(2) 1 }
-- The id-ecPublicKey parameters must be absent or present
-- and are defined as:
-- ECParameters ::= CHOICE {
-- namedCurve OBJECT IDENTIFIER
-- -- -- implicitCurve NULL
-- -- -- specifiedCurve SpecifiedECDomain
-- }
-- This expands SignatureAlgs from [RFC5912]
--
-- SignatureAlgs SIGNATURE-ALGORITHM ::= {
-- sa-rsassapssWithSHAKE128 |
-- sa-rsassapssWithSHAKE256 |
-- sa-ecdsaWithSHAKE128 |
-- sa-ecdsaWithSHAKE256,
-- ...
-- }
-- This expands MessageAuthAlgs from [RFC5652] and [RFC6268]
--
-- Message Authentication (maca-) Algorithms
-- used in AuthenticatedData macAlgorithm in CMS
--
MessageAuthAlgs MAC-ALGORITHM ::= {
maca-KMACwithSHAKE128 |
maca-KMACwithSHAKE256,
...
}
-- This expands SMimeCaps from [RFC5911]
--
SMimeCaps SMIME-CAPS ::= {
-- sa-rsassapssWithSHAKE128.&smimeCaps |
-- sa-rsassapssWithSHAKE256.&smimeCaps |
-- sa-ecdsaWithSHAKE128.&smimeCaps |
-- sa-ecdsaWithSHAKE256.&smimeCaps,
maca-KMACwithSHAKE128.&smimeCaps |
maca-KMACwithSHAKE256.&smimeCaps,
...
}
--
-- KMAC with SHAKE128
maca-KMACwithSHAKE128 MAC-ALGORITHM ::= {
IDENTIFIER id-KMACWithSHAKE128
PARAMS TYPE KMACwithSHAKE128-params ARE optional
-- If KMACwithSHAKE128-params parameters are absent,
-- the SHAKE128 output length used in KMAC is 256 bits
-- and the customization string is an empty string.
IS-KEYED-MAC TRUE
SMIME-CAPS {IDENTIFIED BY id-KMACWithSHAKE128}
}
id-KMACWithSHAKE128 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1)
gov(101) csor(3) nistAlgorithm(4)
hashAlgs(2) 19 }
KMACwithSHAKE128-params ::= SEQUENCE {
kMACOutputLength INTEGER DEFAULT 256, -- Output length in bits
customizationString OCTET STRING DEFAULT ''H
}
-- KMAC with SHAKE256
maca-KMACwithSHAKE256 MAC-ALGORITHM ::= {
IDENTIFIER id-KMACWithSHAKE256
PARAMS TYPE KMACwithSHAKE256-params ARE optional
-- If KMACwithSHAKE256-params parameters are absent,
-- the SHAKE256 output length used in KMAC is 512 bits
-- and the customization string is an empty string.
IS-KEYED-MAC TRUE
SMIME-CAPS {IDENTIFIED BY id-KMACWithSHAKE256}
}
id-KMACWithSHAKE256 OBJECT IDENTIFIER ::= { joint-iso-itu-t(2)
country(16) us(840) organization(1)
gov(101) csor(3) nistAlgorithm(4)
hashAlgs(2) 20 }
KMACwithSHAKE256-params ::= SEQUENCE {
kMACOutputLength INTEGER DEFAULT 512, -- Output length in bits
customizationString OCTET STRING DEFAULT ''H
}
END AcknowledgementsThis document is based on 's document
.
It replaces SHA3 hash functions by SHAKE128 and SHAKE256, as the LAMPS
WG agreed.The authors would like to thank for his guidance and
very valuable contributions with the ASN.1 module. Valuable
feedback was also provided by Eric Rescorla. Authors' AddressesCisco Systemspkampana@cisco.comNIST100 Bureau DriveGaithersburgMD20899United States of Americaquynh.Dang@nist.gov